Miris Check™ solution



Miris Check solution is delivered as a concentrate which is diluted 10 x in distilled or deionized water prior to use. The check solution validates the linearity, zero setting and cleaning of the Human Milk Analyzer at each start up and after every 10th sample.

SKU: 39-01-003 Categories: ,


» The Miris Check solution is used for zero setting the Miris Human Milk Analyzer and control that cleaning has been done successfully
» Application: Only for validation of the preset internal calibration of the Miris HMA.
» Storage: Store the concentrate at room temperature (20-30°C) in a sealed container. Store the diluted solution in glass or plastic containers, out of direct sunlight. Keep away from foodstuff and animal feed.
» Instructions: Dilute 10 ml concentrate (1 tube) with 90 ml distilled or deionized water and mix. Warm to 40°C prior to use. The estimated time for preparation is 15 minutes for mixing the ingredients and to warm the solution to 40°C. The solution is to be used when preparing the instrument for analysis and also after cleaning if analysis is continued.

» 5 tubes per order of 10ml each

Miris is a company who specialize in human milk analysis of pre-term babies. They believe by knowing the macro nutrient composition of human milk, it can be determined whether milk fortification is needed.
Miris is operating on all continents and HMA™ is registered as a Medical Device in Europe, Japan and Indonesia.

Click here to watch a short video on how to mix the check solution. To follow the check procedure, click here.




You may also like…